LEDLIGHT FLEX 16 8
STANDARD 500 IP 66-MFC*

• Reel
• Dimensions: 5000×8×1,4 mm (l×w×h)
• Lumen: 2800 lm
• Number LED: 300
• Input voltage: 24 VDC
• Colour: cold white | 940
• Channels: 1
• Min. bend radius: 20 mm
• Grouping: Reel

• Products
•   Accessories

ANr*	Colour temperature	Power	Lumen/ watt	Lumen/ meter	CRI	Watt/ meter	Datasheets	Colour rendering
50410734T	4000 K	24 W	118 lm/W	560 lm/m	90	4,8 W/m

Stock item (Nuremberg) On request no longer available (Delivery status subject to change)

Please note: An IP X6 test according to DIN EN 60598-1 was carried out. The LED strip successfully passed the water test. In order to obtain the dielectric strength according to DIN EN 60598-1, a suitable housing must also be used. Please note that the IP protective layer is damaged during cutting and soldering. To restore complete protection, the cut and solder joints must be sealed again. We recommend mibenco® liquid rubber for sealing.

The use of connectors is not recommended for IP66-MFC protection.

ANr	Description	Application	Housing/ colour	Datasheets
50990821		Outdoor	white
63500050	Liquid rubber for sealing soldering and cutting stills
50990822		Outdoor	white
50990823		Outdoor	white
66100033		Outdoor	white
66100052		Outdoor	black
50990024	2-pole cable, white, for outdoor use, PUR, 2 x 0.34 mm²	Outdoor	white similar RAL 9003
50990007	one-sided skinning and tinning/soldering to LEDlight flex (additionally cable), 2-pole, boundless wire ends
50990221	two-sided skinning and tinning/soldering to LEDlight flex (additionally cable), 2-pole, boundless wire ends

Maximum LED Strips length in relation to supply line length »


*The LEDlight flex IP 66-MFC (= Micro Film Coating) series has a silicone micro-coating to protect against dew. This means that applications in environments with increased humidity (e.g. bathrooms and protected outdoor areas) can also be equipped with Barthelme LEDlight flex lighting solutions. As the MFC strips have a wafer-thin coating, in contrast to the complete encapsulation of the AQUALUC series, the LED strip must always be additionally protected by a suitable housing. When used in directly weathered areas, our encapsulated product portfolio should be used. We recommend the use of approved Barthelme aluminium profiles as well as suitable covers and end caps. An IPx6 test in accordance with DIN EN 60598-1 was carried out to test the IP 66 MFC strips. The test specimen is exposed to a strong jet of water from all directions for 3 minutes. The LEDlight flex IP 66-MFC strips are not protected against temporary or permanent immersion. Moisture must not remain on the strips for a longer period of time. In order to achieve the dielectric strength according to DIN EN 60598-1, a suitable housing must also be used. Please note that the IP protective layer is damaged during cutting and soldering. To restore full protection, the cut and soldered areas must be resealed. A recommendation of protective lacquers approved by us can be found at www.barthelme.de. The use of LED strip connectors for connecting and joining LED strips without tools is not permitted with MFC strips.